Undecided wheter to use node.js or C/C++ for IoT proyect.
This is my fist time as a poster so please correct my if I'm doing something I'm not supposed to.Some colleagues and I are developing an IoT cloud-based hydroponics automatization system and we are not...
View ArticleClik here to view.
Re: Suitable SD voltage level translators?
Slatye, I was able to determine the voltage level translator used on the Sparkfun micro SD block. I zoomed in on the image and found the marking 5MR which matches the TI TXB0108...
View ArticleRe: Galileo Gen 1 vs Gen 2 problem
I saw exactly the same ADC behavior on my G2 with updated FW 1.03 ; the saw-tooth wave showed up when I put the voltage source on A0 (or other AI ports). When the signal source is removed, the analog...
View ArticleClik here to view.
Re: Intel HD 4600 and Outlook 2013 - white screen
Thanks Richard - but a date should be made public as many user's are facing the same issue.Any provisional dat ethat has been set for release. I really think this is well overdue.
View ArticleRe: Edison wifi connects, but no status page
Indeed, with a new flash complete (v68) everything matches the doc perfectly.
View ArticleD54250WYKH network/pxe boot fail after bios update
Hi, I've having issues booting from network/pxe after updating to bios version 28. I can successfully install windows over pxe if I revert it back to version 21. Bios version tested and failed: 22, 25,...
View ArticleRe: Galileo Debian v1.2 image
StuartAnderson wrote: The instructions in the wiki "How to expand the root filesystem to use the entire SD card" is the easiest way. It uses non-GUI parted utility.I doubt it's the easiest way -...
View ArticleFan control
Hi, I am a video enthousiast and bought a W2600CR workstation for rendering and editing. I am new with server boards. I managed to get the machine up and running. Had a few hickups along the way, but...
View ArticleRe: Flashing edison over wifi (mac)
rosenrot you were spot on, with a new flash complete (v68) everything matches the doc perfectly. I'll have to wait to test the wifi upgrade method till a new version is released, but I pretty sure all...
View ArticleRe: Intel (R) Dual Band Wireless-N 7260 issue
I don't think, I have PROSET software on my PC. Also is it worth to get the NIC replaced with the same version? I understand there have been negative reports on it but from a technical point of view,...
View ArticleRe: SSH to my edison?
I found that once I had wifi working I was able to ssh to the IP of the edison without any hiccups. Nice.
View ArticleCannot update Driver to 15.33.22.64.3621
Hello, I have been trying to update my driver for quite a while now. The computer continues to give me a "not compatible with current operating system", when the INTEL Download Center says that it is...
View ArticleClik here to view.
Re: Intel centrino wireless-n 2230 keeps dropping connection.
After months of problems with limited WiFi and general connectivity problems on Windows 8.1 I finally managed to get it to work properly. In advanced TCP/IP settings under IPv4 protocol settings I put...
View ArticleRe: BSP 1.0.1 fails on OpenCV 2.4.9 during build
dull question: why not taking an image which already has OpenCV? E.G. the SD card image on IoT* - Getting Started | Intel® Developer Zone (with eglibc & uclibc Arduino support). I think AlexT_Intel...
View ArticleRe: How to download packages in linux on edison?
post.user_wrote.label: I tried opkg update, and it did nothing. I have the wifi configured as i can go to it's web page via the browser. What am i missing ?check /etc/opkg settings. You need to set a...
View ArticleRe: USB IR Nuc DN2820
Hi Bartus I tried to do the same thing i also got the dn2820. Intel says that boot on cold (S5) should work with USB or the internal IR receiver. But i tried everything and didn't got it to work. I...
View ArticleRe: Node.js/Javascript IDE now available for Edison!
thanks for the update!Would be nice if the source code / description of the light bulb demo would be published
View ArticleRe: management engine interface code 10.
Actualy, that didn't help a lot... i used an automated troubleshooting service, but thad didn't helped. Others steps I couldn't complet cause they are writen to solve problem of Win7.
View ArticleRe: DN2820FYKH blank screen at boot
I have unfortunately found myself in the same situation, but with 10+ NUC's with the N2820 CPU and the same wrong Corsair 1333MHz RAM.. It has been out of share luck that my previously ordered NUC's...
View Article