Re: Intel R1304BTL BMC access via portforwarding and NAT
normally nat port 7578 is enough. Edit the jviewer.jnlp file : -----------------------------------------EDIT----------------------------------------------<?xml version="1.0" encoding="UTF-8"?>...
View ArticleRe: Does the D54250WYB have a pin to indicate main power is down and it is...
Hi gcerchio, there is one USB 2.0 header and one Custom Solutions header. See pages 13-16.http://downloadmirror.intel.com/23089/eng/D54250WYB_D34010WYB_TechProdSpec06.pdf
View ArticleRe: Android on Intel edison
Hi Jasbir, Currently the only OS supported is Yocto. But it should be possible to port Android to the Edison, I’d suggest you to look over the community for Debian and ubilinux posts on how they ported...
View ArticleClik here to view.
Re: Galileo GEN2 support - linux yocto build
Hi victorlazzarini, I think the issue you are getting is because the gpio numbers are different between the Galileo Gen1 and the Galileo Gen2. For example, for the IO7, the Linux gpio number is 27 in...
View ArticleRe: D54250WYK Windows 8.1 low memory error
And the refund request? I'm pretty sure this falls under the Texas Lemon Law as a defective product that has unsuccessfully had multiple repair attempts under the products factory warranty. I'd rather...
View ArticleRe: Can only access 188Mb of the Edisons 800MB memory
Hi Lachlan, I've just tested the flashing process in two Edisons but I wasn't able to reproduce your issue. Could you please post a screenshot showing the output of the "del *" command and another one...
View ArticleD54250WYK and ASUS SBC-06D2X-U/BLK/G/AS bluray player
Hey Guys, I have an ASUS SBC-06D2X-U/BLK/G/AS external bluray drive and I cannot getting working with my NUC. The bluray player works fine on other computers and I can also get an older USB 2 DVD...
View ArticleRe: Hard Disk Shutdown bug which drivers 12.x.x.xxxx in Z77
All my data is in startup thread.I created a excel table and ALL testing and possible combinations.It is a problem that occurs in all motherboards with intel chip and raid hard drives.Really do not...
View ArticleRe: Starting Intel Galileo from Windows and accessing linux through putty
Hi waggy, I’ve seen problems with that sketch it usually hangs. I’d suggest you to try another method to get into the serial console. There are 3 ways to connect with it: Through serial console cable....
View ArticleRe: I need help with NodeJS i2c.read()
Hi dottedquad, From the datasheet image you posted I assume you are using this pH sensor https://cdn.sparkfun.com/datasheets/Sensors/Biometric/pH_EZO_datasheet_v13.pdf , is that right? According to the...
View ArticleRe: Edison V_VBAT_BKUP
CMata_Intel, thanks for the feedback. The Compute Module Hardware Guide is not much help. Section 4.13 basically says you can hook up a 2.5V supercap or battery and section 5 does not mention...
View ArticleClik here to view.
Re: Intel Widi installation fail
Hi g101, you will only need the Intel® HD Graphics and Intel® PROSet Wireless Software. Based on your hardware and operating system, you should be able to connect via the option “Add a wireless...
View ArticleRe: DZ77SL-50k problem
I find that this board is very sensitive to the type of video connection. I had problems getting my ACER H274HL to work with HDMI and had to use the standard VGA connector.
View ArticleRe: Ethenet no reconocida. Motherboard DZ77SL-50K
I've also had issues with the NIC on this motherboard however I was running UEFI. I had to try and get Secure Boot to reload all keys before the machine would boot with an active NIC. For a short time,...
View ArticleRe: Yocto: How to run daemon on startup? No init.d, etc
Hi TXBDan, Try looking at this thread: How do I run a script on startup on Edison?There is a program to tell the system to update what gets run in the init.d directory... Kurt
View ArticleRe: HD Graphics 4600 screen flickering error
I did not test the drivers Lenovo provides, mostly because they seem petty old.Latest version there is 9.18.10.3272 from 11/6/2013.Why are there different drivers for this one graphics chip anyway?I...
View ArticleRe: Frame grab performance problems using OpenCV on Edison
Thanks for your response, AlexT. I've posted the requested info at the end of this reply. I have explored uvcvideo quirks to some degree, but haven't had any success so far. I decided to download the...
View ArticleRe: Yocto: How to run daemon on startup? No init.d, etc
Thanks, that thread was helpful. Per the thread's recommendation, i opted not to use the init.d approach and instead created a service file in /lib/systemd/system/. I copied another one and modified it...
View Article