Re: Problems getting LCD to work with Galileo
I finally was able to build the 0.8 firmware and the init statement is still needed in order to get my LCD to work. Also in the Linux console window, when the sketch starts I see LOTS of "trace error...
View ArticleRe: NETIO.SYS error, who to fix?
Hello, Yes, i open a thread in DELL support to seek more help, but so far any response! I updated all drivers and could not solve the problem. I think the conflict is in the network adapters that are...
View ArticleScreen Resolution a bit off........
got my i5-haswell nuc a week ago.....its got the updated graphics drivers, its running windows 7. im using it as an HTPC, with XBMC. everything works great. a few XBMC issues, but its up and running....
View ArticleRe: No audio through HDMI with HD 4400
Hi, I have an Intel i3 4130T on Windows 7 32bit with the lastest Intel drivers- That´s works fine and I have hdmi audio, BUT when I power off the TV and switch on it again I lost the audio device...
View ArticleRe: Screen Resolution a bit off........
Hi Bryman31, I had the same problem when I got my first NUC. It turned out to be the aspect setting on my tv. Most tvs are set to 'auto' by default. You want to set the aspect to 'dot-to-dot' for PC...
View ArticleRe: Screen Resolution a bit off........
do you mean the option to set it to theater wide, full screen, etc??
View ArticleRe: Screen Resolution a bit off........
Yes that's the one. It will be different depending on your tv. Mine has settings for dot-to-dot, auto, wide, standard, and a couple of zooms.
View ArticleNew D54250WYK HDMI display dropping out
Hi All, I've had my NUC for a few days and planned to use it as an XBMC media center. I got everything working perfectly, and then noticed a show stopping issue. If I change channel on my TV, then...
View ArticleRe: Haswell NUC CIR receiver (ACPI issue?)
This issue is deeper than that. The issue isn't getting the buttons mapped, but getting the OS to recognise the IR-component. Please have someone who works on the BIOS (i.e. a developer, not a general...
View ArticleRe: New D54250WYK HDMI display dropping out
This is probably related to the LPSP issue Lois spoke about. Intel needs to update the BIOS as well as the graphics drivers to resolve these HDMI handshake negotiation issues that is causing issues...
View ArticleRe: Screen Resolution a bit off........
In my experience with DLP displays it always needed overscan correction. Since I have not connected the NUC to such a display yet, check the Intel Graphics properties to see if there is anything there...
View ArticleStartup problem on DN2800MT
HI Experts,I have been using a DN2800MT successfully some time as an on board computer on my boat.Earlier this year it started to become unreliable. After contacting the supplier and others I have got...
View ArticleRe: Getting Started guide is missing?
Here is the latest version of the Getting Started Guide: https://communities.intel.com/docs/DOC-21838
View ArticleRe: How to get SD card to initialize?
RSavage1, I copy and paste the exact code from the ReadWrite example and my SD card Initialized just fine.I formatted my card to FAT32 as well. Have you tired a different SD card? Regards,Jesus
View ArticleRe: Migration software?
Hello, the Intel® Data Migration Software was designed to transfer all data from the original drive to the Intel® SSD.
View ArticleRe: Intel SSD 530 startup problems - Bug in SSD?
FYI, Bought 3 530s from TigerDirect Because they were so cheap. Installed the first one in my HP 4540s. Same issues. I wish I checked online first but tried to troubleshoot for 4 hours on my own first...
View ArticleRe: iSSDFUT 2.0.9 Not Working?
The ISO image file must be recorded into disc with software capable of burning such image files. Otherwise, it will not boot if it is burnt as data disc.Please refer to pages 17-20 of the Intel® SSD...
View ArticleRe: iSSDFUT 2.0.9 Not Working?
Thanks Joe, But how do you record into disk? It does explain this unless I am missing it.. Thanks
View ArticleRe: Hard Disk Shutdown bug which drivers 12.x.x.xxxx in Z77
12.0.0.1083 works well for me.
View Article