Random USB Bootable stick detection failure
Hi, I am having a desktop with Intel DH77EB motherboard. I have created a bootable XUbuntu stick and the BIOS detects it. To test whether in every reboot it is detected, I have kept a reboot test in...
View ArticleRe: How to implant UEFI Graphic driver for Micro USB display on Galileo platform
Dear JPMontero_Intel, Thanks for your information!Actually, I had done this. But I want to implant the linux driver to the BIOS currently. Best Regards!
View Articleserver 2600cp2 is not starting
Hi,I have brand new intel rack mounted server model 2600cp2.when i start it gives me three beeps and amber light on front panel.And show nothing on LCD/monitor. I have changed it RAM,Processor with...
View ArticleRe: HD 4000 triple monitor works in Linux, not Windows
Hi! This thread is very useful and helpful for me and maybe for persons who try to set up triple display monitors on Intel HD 4000 Graphics. Thank you Erik.Andersson and kevin_intel for...
View ArticleRe: NUC HTPC Sound issues
Installed driver and turned off tv and receiver for the night. This morning loaded up XBMC and Plex and it worked!
View ArticleRe: win 8.1 update 1: taichi 21 broken (no tablet, no mirror, no clone)
Same issue here. Please fix.
View ArticleRe: Makefile Capsule Error
Thank you. But I've read that post before. So I use the commandBASETOOLS=~/buildtools-BaseTools-master/Bin/CYGWIN_NT-5.1-i686/ ../../spi-flash-tools_v0.7.5/Makefile capsuleto build the capsule. I...
View ArticleRe: Yet Another Debian available
Notice: delete this file: /lib/i386-linux-gnu/libpthread-2.13.so-bad I should have completely removed the above file. The bad file can cause segfaults under certain conditions if not removed. I found...
View ArticleClik here to view.
Poor download speeds with Nuc 54250 and the 7260 ac wireless card
I can connect on wifi with both 2.4 and 5 GHz. However signal strength is low when not within a few feet of the router. In the room where the NUC resides it gets about 4Mbps up and down with a Netgear...
View ArticleRe: Makefile Capsule Error
I am sorry - now I am totally confused. The capsule file is built only once, to replace the firmware. It has nothing to do with build tools other than you need the tools to build it. It has nothing to...
View ArticleRe: Intel AC7260 problems
Just bought this from amazon and immediately noticed frequent disconnects (every 30 mins or so). The cheapo USB adapter I was using before, while slower, almost never disconnected me. Thankfully,...
View ArticleRe: Cant enable intel smart response technology acceleration
I just wanted to pipe in that I was having difficulty with this issue on Windows 7 and the problem was having a partition on the SSD as ajb suggested. Afterward, the accelerate partition isn't visible...
View ArticleIntel HD4600 Graphics and NEC PA271W Monitor?
I got an HP Envy 210xt with an i7 4770 processor and the Intel 4600 Graphics on board. HP has configured the ports as a two DVI's, and that's all. They couldn't tell me if they were dual link, but I...
View ArticleClik here to view.
Re: New Bluetooth Drivers
Wow!!! Long live the Intel!!! I wrote about files exchange impossibility between smartphone and ultrabook and vise versa due to lack Obex File Transfer Service in BT stack Intel still 2012.12.10...
View ArticleRe: server 2600cp2 is not starting
Sorry Edwardzh,I entered the server model wrong.Actual number is below. My Board number is S1200V3RP and PBA# is G62254-405. CPU is V31200
View ArticleIntel server s1200 v3rpm with intel chipset c226 is not giving display
i am deploying new Intel server s1200 and it is not giving display on monitor and is giving 3 beeps , i change RAM slots as well without connecting RAM it is giving beep,Please help out.
View ArticleRe: server 2600cp2 is not starting
Then your memory is not compatible with S1200V3RP. S1200V3RP requires low voltage memory (1.35V). Regards,Edward
View ArticleRe: Intel server s1200 v3rpm with intel chipset c226 is not giving display
First of all, check the Memory and Hardware Compatibility.
View ArticleRe: server 2600cp2 is not starting
Okay But i have checked following low voltage RAM. MT18ksfig72AZ-1g6e1ze (Micron) its voltage is 1.3 it also not working
View ArticleRe: server 2600cp2 is not starting
Which processor exactly are you using? And which display port are you using? Display Port or VGA?
View Article