1V8 for UART?
Is the UART input limited to 1V8 so that a logic level converter needs to interface a Serial device hooked up to the Edison? How about a USB device hooked up to D+/D-?
View ArticleRe: Processor Diagnostic Tool strangeness with/without overclock
I am afraid is not possible to roll back to 0132 or earlier BIOS version:“Due to structural changes in this BIOS version, once a board has been converted to this version or later, it will no longer be...
View ArticleRe: Free Windows SDK + Galileo from Microsoft
Hi thanks for the reply, I have narrowed it down a lot more it is related to an installation of AVG Business, when I turn it off totally it is fine I can ping the board via the board name, when I turn...
View ArticleClik here to view.
Re: Issues with Ethernet after change to static IP
Hi, thanks for the reply is there a good guide to follow anywhere about this so far I have just pieced together different pieces but am back to basics since the IP change :S
View ArticleRe: When are the new drivers coming out for the Intel Celeron N2930?
Joe, thanks for the help. So you're saying the best option and latest driver I should use is this one:Intel® Download CenterFile name:GFX_Win7_8_8.1_64_10.18.10.3621.zipVersion: 10.18.10.3621...
View ArticleRe: Dell Inspiron 7737 with Intel i7-4510U CPU not showing correctly in...
Joe, Thank you for your response. You are right. Those settings you mention, I did modify them. I installed MyDell and it corrected the misinformation. as it turns out my system is a 2 core system,...
View ArticleRe: Edison -- Can't Flash
Use unzip vs the mac default zip application. I found this out too! I suspect you are running the beta version of osx too Also be sure to use eject.
View ArticleRe: Edison -- Can't Flash
Ok, did an unzip (from the CLI right to /Volumes/Edison), and then an Eject from Finder, then reboot ota, and SAME FAILURE. (Yes, running Beta 3 of Yosemite). root@LER-Edison:~# reboot ota...
View ArticleRe: Design for a 3D printed Edison Case
It is not possible to download the files. This webpage has a redirect loop.
View ArticleRe: Edison -- Can't Flash
Here is the exact steps I did. I had your very same failure for 2 days and running the same os version. I used the command line to delete the files from /Volumes/Edison cd /Volumes/Edisonrm -rf *...
View ArticleRe: Will the DZ68BC work with a GTX 770 Video Card ?
Hi.Mine was running fine with a GTX 760 and an N300 until last night. Suddenly the motherboard beeps that it cannot find a video card and I can't display the bios unless I remove the GTX 760....
View ArticleRecovering form a bad linux image
Hello All, I have been experimenting with building some native packages in the default Edison env and I royally screwed up my libc bins. So I am in need of just restoring my linux image that is in my...
View ArticleClik here to view.
Re: Edison -- Can't Flash
same last login: Thu Sep 25 17:12:19 on ttys001Larrys-MacBook-Pro:~ lrosenma$ cd /Volumes/Edison/Larrys-MacBook-Pro:Edison lrosenma$ rm rf *rm: rf: No such file or directoryrm: u-boot-envs: is a...
View ArticleRe: Graphics chips: GMA x4500 vs HD 4400
Allan, Thanks for that very detailed reply. I've read the sheets you've linked and attempted to understand as much as possible. Based on experience, I would probably say the newer chip would be...
View ArticleRe: Multithreading in Galileo
Hi Oren_H,We are following up on your case to see if you still need assistance with your project. If you do just reply to this thread with your questions and we’ll be happy to assist you.RegardsSergio
View ArticleRe: Build Intel Edison Yocto Image From Scratch
I've done this using the Intel(R) Edison Board Support Package document Edison BSP User Guide_331188-001.pdf Note that this document refers to a tar file which it does not point to. I searched and...
View ArticleRe: Yocto build and boot from SD card
Hi tsvetan.filev, Remember to post the progress you’ve made in this thread and also any questions you may have regarding your application. RegardsSergio
View ArticleClik here to view.
Re: New Bluetooth Drivers
No. I attached a picture of my device manager after a cold boot and BT software uninstall.
View ArticleRe: Startup Scripts?
I am not sure exactly what you want to do, but I suspect systemd is what you want Helpful links:systemd.serviceandSysVinit to Systemd Cheatsheet - FedoraProject Synopsis:basically you make 'services'...
View Article