Re: CDC serial/Arduino stops working on Windows if more than 50 Edison boards
Go to device manager. Select "show hidden devices" and remove the 49 you don't need any longer
View ArticleRe: Update Edison Without Arduino Expansion Board
SmallLetters,You can accomplish the upgrade with an Intel Mini Breakout Board (without the need for the Arduino board).Since I have not played with the sparkfun console board, I have to ask when you...
View ArticleRe: Updating Edison Firmware Issues
jblackston, the ww42 firmware does complete the flash, but does not clear the ota drive or the contents of /home/root. Although the ww36 firmware did clear all space, I might not be considered a bug,...
View ArticleClik here to view.
Re: Updating Edison Firmware Issues
Intel_Peter,in your DIR, I don't get a boot directory either. Is this boot a directory one created in the ota drive previously, as the ota drive doesn't clear on the ww42 image.
View ArticleRe: D54250WYK Windows 8.1 low memory error
Adding to the chorus - I've just done a fresh build and my NUC is again showing this memory error. As with people above, it manifests when I have a full screen program running (XBMC in my case) and I...
View ArticleRe: Hard Disk Shutdown bug which drivers 12.x.x.xxxx in Z77
Hi guys! Exactly the same issue with RST (2TB RAID1 + 500GB non-RAID HDD) in Win 8.1.BUT I have x79/C600 chipset and I can't even downgrade RST drivers to 11.x.x.x cause my system needs 3.x/4.x RSTe...
View ArticleRe: Cannot find /dev/cu.usbserial[n] when flashing Edison on Mac OS X Yosemite
I was able to get the Arduino software to upload if I used /dev/tty.usbserial-Axxxx. Not sure why, but it seems to be working well now.
View ArticleRe: Intel WiDi not working in Windows 8.1 (Lenovo Y50-70 Notebook + TV...
Has there been any updates to this request? I also have a Lenovo Y50-70 notebook attempting to connect to a Microsoft Wireless Display Adapter with no luck. I have worked with the Lenovo support team...
View ArticleClik here to view.
Issue with Keyboard on USB Host using Arduino
Hi, I am getting started with Edison Using the Arduino Board and I am trying the Keyboard Controler exemple from the Arduino Tool. I have plugged a 12V 200mA AC adapter, the switch on the mini USB...
View ArticleRTC clock alarm to boot up the Edison
Has anyone found out if the Edison RTC clock can be programmed to boot the Edison? I have not found any documentation regarding it.
View ArticleNUC D54250WYK2 disabling USB port after shutdown
I have an annoying issue.My NUC is disabling the USB port if I leave my USB harddisk attached when shutting down. That means that it will not find the disk after startup (but it gets power, as the...
View ArticleBlink a LED at startup
I own the Intel Edison with the Arduino break-out board. The blink a LED example (an Arduino sketch) works prefect. However, when I switch the Edison off and then back on again the LED doesn't blink...
View ArticleRe: Issues with i2c on Galileo gen2 board
I get the same results as above without any i2c devices connected. Am I to assume these 9 addresses are used internally and will conflict with external i2c devices using any of those 9 addresses? I'm...
View ArticleClik here to view.
Re: D54250WYK Windows 8.1 low memory error
Kevin, This issue needs to be escalated in Intel. I deal with it multiple times a day and it's extremely frustrating having to reboot my NUC every time I use it. THIS PRODUCT US BROKEN! The issue...
View ArticleRe: Popup message box in VB6 with Intel® Iris™ and HD Graphics random not...
Björn, you may attach files by clicking on “Reply” and then clicking “Use advanced editor” on the upper corner of the reply box. The “Attach” option appears on the right bottom corner of the reply box.
View ArticleClik here to view.
Intel Driver Update Utility blank results
Just as the title says... I've reinstalled a few time but same results....
View ArticleRe: Edison and...
Are the official images going to continue on the 1.6 path? Or are we looking at a disruptive changes to a 1.7?
View ArticleRe: Grove - I2C Motor Driver does not work with Arduino Expansion Kit
Hi ek, Were you able to use the Motor Driver? Unfortunately I don't have that shield but if you are still getting issues with it please post the code you are using to give it a look. Regards,Diego.
View ArticleFast GPIO Arduino board to logical IO pins on Breakout board?
I know that I have asked similar questions as parts of other questions in different threads, but don't remember seeing any answers about is there any faster methods for updating the external GPIO...
View ArticleRe: Where is the "Edison Native Application Guide" PDF?
It is bothersome that Intel would take down the existing document. Without it I don't even know what to expect of the upcoming document, or if I should be looking elsewhere. I'm interested in the...
View Article